Welcome to Jiangsu Pengfei Group Co.,Ltd. Roller press Special website
Roller press
Description: Our rolling machine is a kind of new-type cement grinding equipment developed on the basis of advanced technology, and its grinding system has integrated the rolling, scattering, separating, drying and powder separating into one body. Besides, when used together with a ball mill, it can be used in various process flows, like pre-grinding, mixing, semi-finished grinding, finished grinding, and more. Due to the change in its grinding principles, this rolling machine and its grinding system have more advantages, like 50-100% lower power consumption, and 100-300% higher productivity.
Sales hotline: +86-513-88755311 88755027
Features
1. Heat overlaying weld has been employed to make the maintenance of wear-resisting layer more convenient. Meanwhile, the amount of microcracks is largely reduced, and the service life of roller surfaces is no less than 8000h. It is quite easy to maintain the roller surfaces.
2. Aeronautic hydraulic technique is used to make the hydraulic system more reliable and stable.
3. With the cooperation of its hydraulic system and automatic control system, it can do the work of load control of main driving motor, deviation control of space between rollers, automatic deviation adjustment, and fault diagnosis.
4. Its matched powder separator has scattering, grading and drying capacity, which makes low operation costs and high working efficiency possible.
Wear resisting liner
There is wear resist liner on the surface of roller, which is hard surfacing to the rollers.
The wearing surfacing can be repaired by hard surfacing. If needed, you can repair the surface without moving rollers.
Technical
Model of roller press PFG
200-180
PFG
180-160
PFG
180-120
PFG
170-100
PFG
160-140
PFG
150-100
PFG
140-120
PFG
140-80
PFG
140-70
PFG
140-65
PFG
120-60
PFG
120-50
Diameter of roller Φ2000 Φ1800 Φ1800 Φ1700 Φ1600 Φ1500 Φ1400 Φ1400 Φ1400 Φ1400 Φ1200 Φ1200
Width of the roller 1800 1600 1200 1000 1400 1000 1200 850 700 650 600 500
Width of the roller(m/s) 1.83 1.74 1.75 1.47 1.47 1.50 1.52 1.46 1.48 1.48 1.47 1.47
Normal working distance
between rollers(mm)
25-50 25-45 24-45 25-45 25-45 22-40 18-35 18-35 18-35 18-35 16-30 16-30
Maximum feed partied size (mm) 65 65 65 60 60 60 60 60 60 60 55 55
Maximum feed temperature (℃) ≤130 ≤130 ≤130 ≤130 ≤130 ≤130 ≤130 ≤130 ≤130 ≤130 ≤130 ≤130
Grinding capacity clinker(t/h) 1000-1250 920-1120 650-750 480-620 600-720 460-500 460-530 300-350 240-334 240-300 110-165 115-170
Raw meal(t/h) 1050-1280 920-1150 700-820 500-650 650-760 480-520 485-550 320-390 280-360 260-320 175-220 130-195
Main motor Model YRKK7104-4 YR6302-4 YR560-4 YR5004-4 YRKK630-6 YR5002-4 YR500-4 YR560-6 YR5001-8 YR5001-8 Y355L-6 Y315L-6
Power(kw) 2000×2 1600×2 1250×2 900×2 1120×2 710×2 800×2 560×2 500×2 500×2 280×2 250×2
Rotary speed(r/min) 1000 1490 1480 1485 993 1485 1485 1485 740 740 960 960
Voltage(v) ~10000 ~10000 ~10000 ~10000 ~10000 ~10000 ~10000 ~10000 ~600 ~600 ~380 ~380
Model of main motor GYM23PZN GYM2292N GYM18PZN RPG29 GYM18P2N RPG26 RPG28 PRG23 XGL48 XGL48 XGM38 XGL38
Weight(t) 290 250 250 208 212 178 176 125 120 115 68 64
 PRINT 【CLOSE】 TOP
Copyright © Jiangsu Pengfei Group Co.,Ltd. All Rights Reserved.
ADD: Benjia,Ji,North Suburbs of Hai'an County,Jiangsu Province,PRC TEL: 0086-513-88755311 88755027 FAX: 0086-513-88755315 E-MAIL: pf@pengfei.com.cn