|
|
PFG120-45 type Roller press |
|
Description: Our rolling machine is a kind of new-type cement grinding equipment developed on the basis of advanced technology, and its grinding system has integrated the rolling, scattering, separating, drying and powder separating into one body. Besides, when used together with a ball mill, it can be used in various process flows, like pre-grinding, mixing, semi-finished grinding, finished grinding, and more. Due to the change in its grinding principles, this rolling machine and its grinding system have more advantages, like 50-100% lower power consumption, and 100-300% higher productivity. |
 |
Sales hotline: +86-513-88755311 88755027 |
|
|
|
|
|
|
Features |
|
1. Heat overlaying weld has been employed to make the maintenance of wear-resisting layer more convenient. Meanwhile, the amount of microcracks is largely reduced, and the service life of roller surfaces is no less than 8000h. It is quite easy to maintain the roller surfaces.
2. Aeronautic hydraulic technique is used to make the hydraulic system more reliable and stable.
3. With the cooperation of its hydraulic system and automatic control system, it can do the work of load control of main driving motor, deviation control of space between rollers, automatic deviation adjustment, and fault diagnosis.
4. Its matched powder separator has scattering, grading and drying capacity, which makes low operation costs and high working efficiency possible. |
|
Wear resisting liner |
|
There is wear resist liner on the surface of roller, which is hard surfacing to the rollers.
The wearing surfacing can be repaired by hard surfacing. If needed, you can repair the surface without moving rollers. |
|
Technical |
| Model of roller press |
PFG
200-180 |
PFG
180-160 |
PFG
180-120 |
PFG
170-100 |
PFG
160-140 |
PFG
150-100 |
PFG
140-120 |
PFG
140-80 |
PFG
140-70 |
PFG
140-65 |
PFG
120-60 |
PFG
120-50 |
| Diameter of roller |
Φ2000 |
Φ1800 |
Φ1800 |
Φ1700 |
Φ1600 |
Φ1500 |
Φ1400 |
Φ1400 |
Φ1400 |
Φ1400 |
Φ1200 |
Φ1200 |
| Width of the roller |
1800 |
1600 |
1200 |
1000 |
1400 |
1000 |
1200 |
850 |
700 |
650 |
600 |
500 |
| Width of the roller(m/s) |
1.83 |
1.74 |
1.75 |
1.47 |
1.47 |
1.50 |
1.52 |
1.46 |
1.48 |
1.48 |
1.47 |
1.47 |
Normal working distance
between rollers(mm) |
25-50 |
25-45 |
24-45 |
25-45 |
25-45 |
22-40 |
18-35 |
18-35 |
18-35 |
18-35 |
16-30 |
16-30 |
| Maximum feed partied size (mm) |
65 |
65 |
65 |
60 |
60 |
60 |
60 |
60 |
60 |
60 |
55 |
55 |
| Maximum feed temperature (℃) |
≤130 |
≤130 |
≤130 |
≤130 |
≤130 |
≤130 |
≤130 |
≤130 |
≤130 |
≤130 |
≤130 |
≤130 |
| Grinding capacity |
clinker(t/h) |
1000-1250 |
920-1120 |
650-750 |
480-620 |
600-720 |
460-500 |
460-530 |
300-350 |
240-334 |
240-300 |
110-165 |
115-170 |
| Raw meal(t/h) |
1050-1280 |
920-1150 |
700-820 |
500-650 |
650-760 |
480-520 |
485-550 |
320-390 |
280-360 |
260-320 |
175-220 |
130-195 |
| Main motor |
Model |
YRKK7104-4 |
YR6302-4 |
YR560-4 |
YR5004-4 |
YRKK630-6 |
YR5002-4 |
YR500-4 |
YR560-6 |
YR5001-8 |
YR5001-8 |
Y355L-6 |
Y315L-6 |
| Power(kw) |
2000×2 |
1600×2 |
1250×2 |
900×2 |
1120×2 |
710×2 |
800×2 |
560×2 |
500×2 |
500×2 |
280×2 |
250×2 |
| Rotary speed(r/min) |
1000 |
1490 |
1480 |
1485 |
993 |
1485 |
1485 |
1485 |
740 |
740 |
960 |
960 |
| Voltage(v) |
~10000 |
~10000 |
~10000 |
~10000 |
~10000 |
~10000 |
~10000 |
~10000 |
~600 |
~600 |
~380 |
~380 |
| Model of main motor |
GYM23PZN |
GYM2292N |
GYM18PZN |
RPG29 |
GYM18P2N |
RPG26 |
RPG28 |
PRG23 |
XGL48 |
XGL48 |
XGM38 |
XGL38 |
| Weight(t) |
290 |
250 |
250 |
208 |
212 |
178 |
176 |
125 |
120 |
115 |
68 |
64 | | | |
|
|
|
|
